Hard reset NETGEAR ProSafe GS108

To perform a hard reset of your Netgear ProSafe GS108:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR WNDR3300

To perform a hard reset of your Netgear WNDR3300:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR DG834N

To perform a hard reset of your Netgear DG834N:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR DG834GT

To perform a hard reset of your Netgear DG834GT:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR GS605

To perform a hard reset of your Netgear GS605:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR DG834PN

To perform a hard reset of your Netgear DG834PN:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR N900 Wireless Dual Band Gigabit Router…

To perform a hard reset of your Netgear N900 Wireless Dual Band Gigabit Router...:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset NETGEAR N750 Wireless Dual-Band Gigabit Router…

To perform a hard reset of your Netgear N750 Wireless Dual-Band Gigabit Router...:


1. Find the Restore/Reset button on your router(usually located in a pinhole on the back of the router).
2. Use a paperclip or pencil tip to press and hold the button until the Power led starts to blink. It usually takes between 7 and 9 seconds.




To find out your router default username and password continue reading

Hard reset TP-LINK Archer A2300

The Reset button (hole) is located on the side panel. Use a pin or paper clip to press and hold this button for more than 5 seconds. Release and wait for the router to reboot and reset to its factory default settings.

To find out your router default username and password continue reading

Hard reset TP-LINK Archer AC3000

The reset button is a hole located on the back panel of the router. Pressing this button (using a pin or a paper clip) for about 7 seconds resets the router to its factory default settings.

To find out your router default username and password continue reading